SONIC TWO CYCLE Oil

(View MSDS)
(AIR COOLED TWO CYCLE MOTOR OILS)

DESCRIPTION

SONIC TWO CYCLE OIL is a quality 2-cycle oil that is recommended for both air cooled and older water cooled 2-cycle engines. It is formulated to meet the requirements of low ash applications. Although predominantly used in tank mix applications, it may be injected in specific equipment.

APPLICATIONS

SONIC TWO CYCLE OIL is recommended for use in 2-cycle engines requiring a fuel/oil ration of 50:1 or less and a NMMA low ash formulation. SONIC TWO CYCLE OIL can be used in chain saws, lawn mowers, snow throwers, and utility motors that require a 2-cycle engine oil. In all cases the manufacturer’s recommendations should be consulted.

NOTE: Do not use this product in equipment that callsfor a synthetic two-cycle engine oil

Performance Features

SONIC Two Cycle Oil provides the following performance features:

  1. Prevents piston scuffing.
  2. Minimize ring sticking and spark plug fouling.
  3. Minimize rust, corrosion and exhaust system deposits.
  4. Eliminate pre-ignition.
  5. Pre-diluted for easier mixing at all temperatures.
  6. Qualified TC and Low Ash.

Typical Properties

Color Blue
Kinematic Viscosity@ 40°C, cst 37.1
Kinematic Viscosity@ 100°C, cst 6.6
Viscosity Index 134
Pour Point,°C -36

Availability

1 L bottle (12 per case) and 500 mL bottle (12 per case).

Mixing Table*

Gasoline to Oil Ratio Litres of Gasoline
5 L 10 L 15 L 20 L 25 L
16:1 300 mL 600 mL 900 mL 1.2 L 1.5 L
25:1 200 mL 400 mL 600 mL 800 mL 1.0 L
32:1 150 mL 300 mL 450 mL 600 mL 750 mL
40:1 125 mL 250 mL 375 mL 500 mL 625 mL

* The body of the table shows the amount of oil that must be added to obtain the gasoline to oil ratio (1 litre = 1000 mL)